TEL +886-2-6600-7574 +886-2-6600-7513
HAYASHI DC Brushless electric Screw Driver
The fully automatic/manual type lock screw machine adopts a DC brushless motor, which does not need to worry about the service life of the motor due to friction, and has excellent repeated stability and torque value.
- Excellent repeatability and torque values.
- The speed is 1.5 - 2 times higher than the old model.
- Fully automatic / manual type.
- Offset (narrow pitch, multi-axis eccentricity) Customizable.
- The special stroke structure reduces the screw deadlock rate (full range of standard).
- Compatible with ESD specifications.
- Thanks to the brushless DC motor, there is no need to worry about the service life of the motor due to friction. Moreover, the motor operation has become very quiet.
- The function of the angle control fastening screw is newly set.
- Torque screw tightening: Tighten the screws to the set torque value.
- Screw fastening (angle limit): Set the upper limit of the rotation angle to prevent screw cutting.
- Control angle tightening screw: Set the angle of the screw length to tighten the screw correctly.
- Loosen the screw: Loosen the screw according to the two settings for the set torque value and angle management.
- The angle setting unit has been changed from 10° to 1° of the conventional product (CT-F) for more subtle settings.
- In continuous operation mode, it can be confirmed in which parameter memory the alarm occurs.
- The tightening/releasing torque values and angles of the screws can be set with different parameters.
- Separating the controller from the power supply expands the work space by moving the power supply unit under the table.
- According to the same current control method as before, the stability of the torque is achieved!