γ-S168CE PCB Separator

Contact us   Print

Zoom
- 2-way sliding work exchanger provides a simultaneously in-and-out working to limit the idle time, which in turn reaches the utmost output value.
- Available in linear and cutting to diminish restrictions of PCB design.
- Friendly man-machine interface with 10X CCD Camera to minimize the time of programming.
- Auto Fiducial mark point check and cutting route auto compensation(option).
- Vacuum cleaner with auto power on/off function to save the power.


2-way Sliding Exchanger
This work exchanger provides a simultaneously in-and-out working space to limit the idle time, which in turn reaches the utmost output value.

Route Duplication
The user may set mark points on PCB and copy easily form side to another.

Routing Bit Sectioning
The user may set a designated distance, and have the routing bit shift-up or -down in order to make a new section of touting bit to cut boards for multiplying the life of the routing bit.

Friendly GUI
Windows system and Graphical User Interface (GUI) is adopted, which enables the user to learn and use the program easily. A 10 x zoom-in image is shown on screen for setting all points.
Fixture Table 2 Stations
Fixture Working Area X: 330 mm, Y: 330 mm, Z: 60 mm
Cutting Area (Max.) X: 330 mm, Y: 330 mm
PCB Height (Max.) Upside: 15 mm
Downside: Universal Jig - 35 mm, Specific Jig - 45 mm
PCB Thickness 0.5 ~ 2.0 mm (Please advise Aurotek when the thickness is more than 2 mm)
Standard Router Bit Diameter ∅1.0, ∅1.2, ∅1.6, ∅2.0 mm
Cutting Accuracy ± 0.1 mm
Positioning Repeatability ± 0.01 mm
Axis 3 Axes (X, Y, Z).
Moving Speed (Max.) X, Y: 700 mm/sec, Z: 500 mm/sec
Cutting Speed (Max.) X, Y, Z: 100 mm/sec
Spindle Rotation 265W / 58,000 rpm (Air Chuck System)
Router Bits Change Manual
Cutting Mode Linear, Circular, U-curve, Arc, L-curve
X, Y, Z Axis Control AC Servo motors
Cutting Feed 0 ~ 9 times (Depending on the PCB thickness)
Route Planning Set up the paths guided by CCD camera manually.
Safety Area Sensor Optional
Broken Router Bit Detection Optional
Method to back up the program USB
Program Storage HDD
Operating System Windows 7
Man-Machine Interface LCD Monitor, Keyboard, Mouse
PCB Loading / Unloading Manual
Power Supply 3 Phase AC220V±3% 50Hz/60Hz, 2.5kw
Pneumatic Pressure 0.5 Mpa
Dimensions (W x D x H) 1168 x 1498 x 1264 mm *Signal Light - 565 mm
Net Weight for the machine Approx. 390 KGS
Height for Working Area (Max.) 930mm
Vacuum Cleaner YSF-V553 3HP 2.2 kw