MC8841P/MC8881P Multi-Axis Motion control card

お問い合わせ   プリント

ズーム
MC8841P / MC8881P is a high speed motion control board, that can used to drive step and servo motor.

MC8841P / MC8881P features include:
-4/8 axis independent position / speed controllable.
-2-4 / 2-8 axis, 2 axis circular, continuous, linear interpolation cross with different MC8841/MC8881s.
-Max. pulse output rate is 8 Mpps (4Mpps when interpolation).
-Max. acceleration rate is 1024 Mpps2 .
-It can easy to set up personal computer based on PCI interface.
Motor type support AC Servo/ Stepping motor
Max. number of axes 4 axis / 8 axis
Max. pulse output rate 8 Mpps (4Mpps when interpolation)
Max. acceleration rate 1024 Mpps2
Interpolation -2-4 axis   /  2-8 axis linear interpolation
-2 axis circular interpolation
-Linear interpolation cross with different MC8841/MC8881s
Speed resolution 16bits(1~65,536)
Encoder counter resolution 32 bit (Max. 2,147,483,648)
Encoder feedback rate 4Mpps under quadrature AB phase
Position range 32bits(±2,147,483,648)
I / O Interface signal External power DC
Machine interfaces LMT x 4 / x 8,LMT- x 4 / x 8,ORG x 4 / x 8
Servo motor interface ALM x 4 / x 8,INP x 4 / x 8
General inputs (IN0 ~ IN2) x 4 / x 8
General outputs (Out4 ~ Out7) x 4  / x 8  Max.100mA
Dimension (L x W x H) 175 x 100 x 20 mm
Power consumption Typical 5 V @ 700 mA / 950 mA