お問い合わせ   プリント

ズーム
Fixture Table 1 Station
Fixture Working Area X: 330 mm, Y: 330 mm, Z: 60 mm
Cutting Area (Max.) X: 330 mm, Y: 330 mm
PCB Height (Max.) Upside: 15 mm
Downside: UniversalJig - 35 mm, Specific Jig - 45 mm
PCB Thickness 0.5 ~ 2.0 mm (Please advise Aurotek when the thickness is more than 2 mm)
Standard Router Bit Diameter ∅1.0, ∅1.2, ∅1.6, ∅2.0 mm
Cutting Accuracy ± 0.1 mm
Positioning Repeatability ± 0.01mm
Axis 3 Axis (X, Y, Z).
Moving Speed (Max.) X, Y : 500 mm/sec, Z: 100 mm/sec
Cutting Speed (Max.) X, Y, Z:  100 mm/sec
Spindle Rotation 265W / 58,000 rpm (Air Chuck System)
Router Bits Change Manual
Cutting Mode Linear, Circular, U-curve, Arc, L-curve
X, Y, Z Axis Control AC Servo motors
Cutting Feed 0 ~ 9 times (Depending on the PCB thickness)
Route Planning Touch Pad guided by CCD camera.
Safety Area Sensor N/A
Broken Router Bit Detection Standard
Method to back up the program USB
Program Storage EEPROM
Operating System N/A
Man-Machine Interface Teach Pad
Conveyor Width Adjustment N/A
Conveyor Load Capacity N/A
PCB Loading / Unloading Manual
Power Supply Single Phase, AC220V±3% 50Hz/60Hz, 1.1 kw
Pneumatic Pressure 0.5 Mpa
Dimensions (W x D x H) 670 x 842 x 588 mm *Signal Light - 179.5 mm
Net Weight for the machine Approx. 118 KGS
Height for Working Area (Max.) 1200 mm
Vacuum Cleaner YSF-V553 ZETA 3HP 2.2kw