γ-S330L PCB Separator

Contact us   Print

Zoom
γ-S330L is the upgrade version of γ-S330W but with larger working area and identical quality. For continuing the past successful experience, we keep improving our R&D progress and providing complete solution for global customers.

Two slide tables: provides a simultaneously in-and-out working space to limit the idle time which in turn reaches the utmost output value.


Aurotek always pay our best attention to prevent any accident during operation with immediate stop function. Therefore, we use block-out infrared sensors to reduce unnecessary risks of operation.


CCD image could check & simulate the path of routing to reduce unnecessary mistake before actual cutting.

Large working area : X:450mm, Y:520mm each table.

Automatic bit break detection:

Detect router bit status right after every cutting motion, avoid invalid operation.
Detect router bit life, remind the operator to change the bit or automatically change router bit by itself.

Option: Automatic router bit change
Time cost saved, automatic detect router bit life and using status.
When the cutting blade reaches its limit, the system will replace with a new blade and resume production automatically, it dramatically reduces configuration time, maintenance related personnel cost.


Fixture Table 2 Stations
Fixture Working Area X: 450 mm, Y: 520 mm, Z: 60 mm
Cutting Area (Max.) X: 450 mm, Y: 520 mm
PCB Height (Max.) Upside: 15 mm
Downside: Universal Jig - 35 mm, Specific Jig - 45 mm
PCB Thickness  0.5 ~ 2.0 mm (Please advise Aurotek when the thickness is more than 2 mm)
Standard Router Bit Diameter ∅1.0, ∅1.2, ∅1.6, ∅2.0 mm
Cutting Accuracy ± 0.08 mm
Positioning Repeatability ± 0.01mm
Axis 4 Axis (X, YL, YR, Z).
Moving Speed (Max.) X, YL, YR: 1000 mm/sec, Z: 750 mm/sec
Cutting Speed (Max.) X, Y, Z: 100 mm/sec
Spindle Rotation 265W / 58,000 rpm (Air Chuck System)
Options: 4025DC-T: 470W (Max.: 30,000 rpm) ; 4033: 500W (Max.: 100,000 rpm)
Router Bits Change Manual
Cutting Mode Linear, Circular, U-curve, Arc, L-curve
X, Y, Z Axis Control AC Servo motors
Cutting Feed 0 ~ 9 times (Depending on the PCB thickness)
Route Planning Set up the paths guided by CCD camera manually.
Safety Area Sensor Standard
Broken Router Bit Detection Standard
Method to back up the program USB
Program Storage HDD
Operating System Windows 7
Man-Machine Interface LCD Monitor, Keyboard, Mouse
Conveyor Width Adjustment N/A
Conveyor Load Capacity N/A
PCB Loading / Unloading Manual
Power Supply 3 Phase AC220V±3% 50Hz/60Hz, 4.0kw
Pneumatic Pressure 0.5 Mpa
Dimensions (W x D x H) 1810 x 1409 x 1350 mm *Signal Light - 280 mm
Net Weight for the machine Approx. 720 KGS
Height for Working Area (Max.) 930 mm
Vacuum Cleaner YSF-V605 5HP 3.7kw