HAYASHI DC brushless electric screwdriver

☆Thanks to brushless DC motor ,there will be no more worn down of the brush . A longer life time of the motor and a quiet operation can be expected.     
☆The new function of angle control in tightening operation has been adopted.

• 1. Torque tightening of screw・・・Tightening the screw with set Torque.
• 2. The tightening of the screw (Limited angle)    
       It can prevent from stripping of the thread by adopting the limitation of rotating angle 
• 3. The tightening of the screw with angle control 
       The screw can be tightened precisely by setting the angle for the length of the screw.   
• 4. The loosening the screw 
      User can select a setting from 2 kind of the torque value or angle control.  
• 5. The unit for setting  angle is now 1°. It can be controlled more precisely comparing with conventional type of CT-F.    

☆Now you can find the error  Bank  in the operation .     
☆With　setting　of each different parameters, User can set the torque for tightening ,the torque for loosening and the angle of rotation.
☆Power supply is now separated from the housing of controller. User can have a wide space by placing the controller under the table for instance.
☆The steady precise torque can be obtain  with the same conventional current control system.

Automatic machine / SD-F Series	Manual machine / SD-MF Series
Manual machine / SD-ML Series	Offset type
Out Electric Screwdriver Type
SD-F Series (for automatic machine installed) Electric screwdriver type  (external view download) SD-500FC SD-1500F SD-5000F SD-10000F SD-18000F Controller model CT-F, CT-FA Torque range  [N · m] 0.011-0.055 0.025-0.145 0.095-0.513 0.190-1.000 0.350-1.800 Controller display torque range  [kgf · cm] 0.11-0.55 0.25-1.45 0.95-5.13 1.9-10.0 3.5-18.0 No-load rotational speed  [rpm] 471-1,380 432-1,840 247-1,280 125-655 120-570 Corresponding screw type (see) M0.6-M1.0 M1.0-M1.7 M1.7-M3 M3-M4 M3-M5  SD-MF series (manual electric screwdriver: with encoder) Electric screwdriver type  (external view download) SD-1500MF SD-5000MF SD-10000MF Controller model CT-F, CT-FA Torque range  [N · m] 0.025-0.145 0.095-0.513 0.190-1.000 Controller display torque range  [kgf · cm] 0.25-1.45 0.95-5.13 1.9-10.0 No-load rotational speed  [rpm] 432-1,840 247-1,280 125-655 Corresponding screw type (see) M1.0-M1.7 M1.7-M3 M3-M4  SD-ML series (manual electric screwdriver: None encoder) Electric screwdriver type  (external view download) SD-500ML SD-1500ML SD-5000ML SD-10000ML Controller model CT-FA-ML Torque range  [N · m] 0.011-0.055 0.025-0.145 0.095-0.513 0.190-1.000 Controller display torque range  [kgf · cm] 0.11-0.55 0.25-1.45 0.95-5.13 1.9-10.0 No-load rotational speed  [rpm] 471-1,380 432-1,840 247-1,280 125-655 Corresponding screw type (see) M0.6-M1.0 M1.0-M1.7 M1.7-M3 M3-M4 If you want to convert the torque value to kgf · m is ※, please refer to the conversion formula below.  1.0 kgf-M = 9.80665N-M ≒ 10N-M  1 gf-M = 9.80665N-M ≒ 10 mN-M  1 kgf-cm = 0.0980665N-M ≒ 0.1 N-M
Options Option
End cap unit
SD-10000F, 18000F, 10000MF, the tip cover attachment to 18000ML, you will need a tip cap unit.  (Applicable tube outer diameter: φ6)
Connection cable
It is a connection cable for connecting the dedicated controller and electric screwdriver.
Model Length C10F-3500RCR 3.5m ※ For length other than the above, please contact your sales representative.  ※ All connection cables has become a robot cable specification.  ※ SD-500F, SD-ML series, dedicated cable is included.