γ-S330W PCB Separator

Contact us   Print

Zoom
- Two-slide PCB Separator
- Low Stress
- Sharp cutting edge
- Manual loading / unloading
- High speed cutting by 4 axes control
- Easy teaching with image processing

  • 2-way Sliding Exchanger
    This work exchanger provides a simultaneously in-and-out working space to limit the idle time, which in turn reaches the utmost output value
  • Route Duplication
    The user only needs to set two referent points to duplicate a same route in saving programming time
  • Routing Bit Sectioning
    The user may set a designated distance, and have the routing bit shift-up or -down in order to make a new section of touting bit to cut boards for multiplying the life of the routing bit.
  • Friendly GUI
    Windows XP system and Graphical User Interface (GUI) is adopted, which enables the user to learn and use the program easily. A 10 x zoom-in image is shown on screen for setting all points.

Fixture Table 2 Stations
Fixture Working Area X: 330 mm, Y: 330 mm, Z: 60 mm
Cutting Area (Max.) X: 330 mm, Y: 330 mm
PCB Height (Max.) Upside: 15 mm
Downside: Universal Jig - 35 mm, Specific Jig - 45 mm
PCB Thickness 0.5 ~ 2.0 mm (Please advise Aurotek when the thickness is more than 2 mm)
Standard Router Bit Diameter ∅1.0, ∅1.2, ∅1.6, ∅2.0 mm
Cutting Accuracy ± 0.08 mm
Positioning Repeatability ± 0.01mm
Axis 4 Axis (X, YL, YR, Z).
Moving Speed (Max.) X, YL, YR: 1000 mm/sec, Z: 750 mm/sec
Cutting Speed (Max.) X, Y, Z: 100 mm/sec
Spindle Rotation 265W / 58,000 rpm (Air Chuck System)
Options: 4025DC-T: 470W (Max.: 30,000 rpm) ; 4033: 500W (Max.: 100,000 rpm)
Router Bits Change Manual
Cutting Mode Linear, Circular, U-curve, Arc, L-curve
X, Y, Z Axis Control AC Servo motors
Cutting Feed 0 ~ 9 times (Depending on the PCB thickness)
Route Planning Set up the paths guided by CCD camera manually.
Safety Area Sensor Standard
Broken Router Bit Detection Standard
Method to back up the program USB
Program Storage HDD
Operating System Windows 7
Man-Machine Interface LCD Monitor, Keyboard, Mouse
Conveyor Width Adjustment N/A
Conveyor Load Capacity N/A
PCB Loading / Unloading Manual
Power Supply 3 Phase AC220V±3% 50Hz/60Hz, 2.5 kw
Pneumatic Pressure 0.5 Mpa
Dimensions (W x D x H) 1190 x 1039 x 1401 mm *Signal Light - 525 mm
Net Weight for the machine Approx. 390 KGS
Height for Working Area (Max.) 930mm
Vacuum Cleaner YSF-V553 3HP 2.2 kw