γ-S330IN-LINE-SL/SR PCB Separator

Contact us   Print

Zoom
- A fully Loading/ unloading automatic processing in-line machine.
- 2-way sliding work exchanger to limit the idle time and simultaneously loading and unloading to reaches the utmost output value.
- Friendly Touch Panel with 10X CCD Camera to minimize the time of programming.
- Auto fiducial mark point check and cutting route auto compensation to insure the cutting accuracy.
- Automatic router bit check to prevent the bit break incomplete cutting.

Loading / Unloading The width of conveyer can be adjusted to fit the different size of works. The pick-and-place device improves the efficiency of the loading and unloading process.

2-way Sliding Exchanger This work exchanger provides a simultaneously in-and-out working space to limit the idle time, which in turn reaches the utmost output value. Touch Panel Monitor Graphical User Interface (GUI) is adopted, and enables the user to operate by the touch panel easily.

Friendly GUI Windows system and Graphical User Interface (GUI) is adopted, which enables the user to learn and use the program easily. A 10 x zoom-in image is shown on screen for setting all points.

Fixture Table 2 Stations
Fixture Working Area X: 330 mm, Y: 350 mm, Z: 60 mm
Cutting Area (Max.) X: 330 mm, Y: 350 mm (Min.) X: 100 mm, Y: 100 mm
PCB Height (Max.) Upside: 15 mm
Downside: Universal Jig - 35 mm, Specific Jig - 45 mm
PCB Thickness 0.5 ~ 2.0 mm(Please advise Aurotek when the thickness is more than 2 mm)
Standard Router Bit Diameter ∅1.0, ∅1.2, ∅1.6, ∅2.0 mm
Cutting Accuracy ± 0.08 mm
Positioning Repeatability ± 0.01mm
Axis 7 Axis (X, YL, YR, Z, Carry, P/P, Conveyor).
Moving Speed (Max.) X, YL, YR : 1000 mm/sec, Z: 750 mm/sec
Cutting Speed (Max.) X, Y, Z: 100 mm/sec
Spindle Rotation 265W / 58,000 rpm (Air Chuck System)
Options: 4025DC-T: 470W ((Max.: 30,000 rpm) ; 4033: 500W (Max.: 100,000 rpm)
Router Bits Change Manual
Cutting Mode Linear, Circular, U-curve, Arc, L-curve
X, Y, Z Axis Control AC Servo motors
Cutting Feed 0 ~ 9 times (Depending on the PCB thickness)
Route Planning Set up the paths guided by CCD camera manually.
Safety Area Sensor N/A
Broken Router Bit Detection Standard
Method to back up the program USB
Program Storage HDD
Operating System Windows 7
Man-Machine Interface Touch screen Monitor, Keyboard, Mouse
Conveyor Width Adjustment (Max.) Y: 350 mm (Min.) Y: 100 mm
Conveyor Load Capacity 3 KGS
PCB Loading / Unloading Automatic
Power Supply 3 Phase AC220V±3% 50Hz/60Hz, 2.5 kw
Pneumatic Pressure 0.5 Mpa
Dimensions (W x D x H) 2002 x 1279 x 1716 mm *Signal Light - 578 mm
Net Weight for the machine Approx. 640 KGS
Height for Working Area (Max.) 930 mm
Vacuum Cleaner YSF-V605 5HP 3.7kw